Ditch Witch JT60AT - Manual (Page 49)

JT60/JT60 All Terrain Operator’s Manual
Controls - 49
Override Box
Override Box
1. Tracker control key
2. Drilling fluid flow override switch
3. Rotation or right track override switch
4. Thrust/pullback or left track override switch
5. Drill override port
6. Drive override port
Item Description Notes
1. Tracker control key To allow tracker operator to
stop thrust and rotation, move
key to enable position (up).
To override tracker control
mode, move key to disable
position (right).
IMPORTANT: Remove key and keep
in tracker operator’s possession.
See “Tracker Control” on page 133.
2. Drilling fluid flow
override switch To turn fluid on, move right.
To turn fluid off, move left.
Connect to drill connector (B) to
control fluid flow.
j40om073w.eps
2
4
3
A B
1