Ditch Witch JT60AT - Manual (Page 28)

Controls - 28
JT60/JT60 All Terrain Operator’s Manual
Left Control Console
Most engine display functions are self-explanatory. For more information about functions, see the
manufacturer’s instructions at www.fwmurphy.com.
Main Menu
4. Soft key Press to select a soft key
command. Soft key commands change with each
menu screen and are displayed next
to the key.
5. Soft key
6. Main menu key Press from main screen
(gauges) to select main
menu.
7. Soft key Press to select a soft key
command. Soft key commands change with each
menu screen and are displayed next
to the key.
8. Soft key
9. Engine coolant
temperature display Displays engine coolant
temperature. Normal coolant temperature is 160°-
212° F (71°-100° C).
10. Engine oil pressure
display
Displays engine oil pressure. Full load reading should be 45-70 psi
(3.1-4.8 bar).
11. Hour meter Displays number of hours
engine has been running.
12. Drilling fluid flow
display
Displays the estimated GPM
or LPM of drilling fluid being
pumped.
IMPORTANT: Soft key commands change with each menu screen and are displayed next to the key.
Item Description Notes
11. System settings key Press to select system
settings menu. System settings menu displays
information about the system.
Diagnostic information is only
available to dealer technicians.
10. User settings key Press to select user settings
menu. User settings menu allows user to
change the language and unit
settings, and to set the time and date.
9. Main screen key Press to return to main
screen (gauges).
8. Engine diagnostics key Press to select engine
diagnostics menu. For dealer technician use only.
Item Description Notes