Ditch Witch JT60AT - Manual (Page 197)

JT60/JT60 All Terrain Operator’s Manual
Service - 197
2000 Hour
2000 Hour
Drilling Unit
Change Engine Coolant
Drain cooling system at drain every two years or
2000 hours. Drain cooling system at drain (3) and
refill at radiator cap (2) with approved coolant.
Capacity is 7.7 gal (29 L). Check level at sight
glass (1).
Location Task Notes
DRILLING
UNIT Change engine coolant
NOTICE:
• Coolant change interval depends on
coolant used and whether SCA levels are
properly maintained. Read note above
carefully to ensure coolant is changed at
the correct interval.
• The use of non-approved coolant may lead
to engine damage or premature engine
failure and will void engine warranty.
• Use only distilled water for mixing coolants.
Do not use tap water.
• See “Recommended Lubricants/Service
Key” on page 170 for list of approved
coolants.
j40om062w.eps
1
2
3