Ditch Witch JT60AT - Manual (Page 91)

JT60/JT60 All Terrain Operator’s Manual
Transport - 91
Tow
Unload
1. Lower trailer or ramps.
2. Fasten and adjust seat belt.
3. Remove tiedowns.
4. Start drilling unit engine.
5. Raise stabilizers.
6. Raise drill frame.
7. Slow engine to low throttle and slowly back unit down trailer or ramps.
Tow
Under normal conditions, drilling unit should not be towed. If unit breaks down and towing is necessary:
• tow for short distances at less than 1 mph (1.6 km/h),
• attach chains to indicated tow points facing towing vehicle,
• use maximum towing force of 1.5 times unit weight,
• disengage track planetaries.
Crushing weight. If load falls or moves it could kill or crush you. Use
proper procedures and equipment or stay away.
To help avoid injury:
• Load and unload trailer on level ground.
• Ensure trailer wheels are blocked.
• Attach trailer to vehicle before loading or unloading.