Assemble accessories, Jt60/jt60 all terrain operator’s manual – Ditch Witch JT60AT User Manual
Page 81
JT60/JT60 All Terrain Operator’s Manual
Prepare - 81
Check Supplies and Prepare Equipment
JT Mode
•
Install SaverLok, pipe gripper pads, pipe guide blocks, pipe wiper, shuttle stop, wrench jaw blocks, and
pipe lifter pads sized to handle Mach 1 pipe.
•
Use standard transition sub and beacon housing. Select soil bit based on jobsite conditions.
•
Use auger type anchors.
•
Load JT pipe and pipe box onto unit.
•
Move mode selector switch to JT position.
Assemble Accessories
Fire Extinguisher
If required, mount a fire extinguisher near the power unit but away from possible points of ignition. The fire
extinguisher should always be classified for both oil and electric fires. It should meet legal and regulatory
requirements.
IMPORTANT: Use conversion kit (p/n 101-136) and refer to installation instructions (p/n 051-329).
NOTICE: Do not put JT pipe into a large All Terrain pipe box. Pipe can jam and box can be
damaged. Use JT pipe box.