ADLINK PCI-8154 - Manual (Page 181)

Function Library 171
@ Argument
AxisNo : Axis number designated to move or stop.
Disable : Disable pulser input.
Disable = 1, disable pulser
Disable = 0, enable pulser
Dist : Specified relative distance to move (unit: pulse)
For example, if SpeedLimit is set to be 100pps, then the axis
can move at fastest 100pps, even the input pulser signal rate is
more then 100pps.
DivF : Divide factor (1-2047)
Note: When 0 or 2048 is entered, the division circuit will be
OFF.
MultiF : Multiplication factor (0-31)
InputMode : Setting of manual pulse input mode from the PA and
PB pins
card_id Physical axis AxisNo
0
0 0
1 1
2 2
3 3
1
0 4
1 5
… …
Value Meaning
0 1X AB phase type pulse input
1 2X AB phase type pulse input
2 4X AB phase type pulse input
3 CW/CCW type pulse input