ADLINK PCI-8154 - Manual (Page 143)

Function Library 133
_8154_reset_security_key
_8154_check_security_key :
This function is used to verify the security code which the user
set by the function “_8154_set_security_key”.
See also:
_8154_set_security_key
_8154_reset_security_key
_8154_reset_security_key :
By this function, Users can reset the security code on the PCI
card to default value. The default security code is0.
See also:
_8154_check_security_key
_8154_set_security_key
_8154_config_from_file :
This function is used to load the configuration of the PCI-8154
according to specified file. By using MotionCreatorPro, user
could test and configure the 8154 correctly. After saving the
configuration, the file would be existed in user’s system direc-
tory as 8154.ini.
When this function is executed, all 8154 cards in the system
will be configured as the following functions were called
according to parameters recorded in 8154.ini.
_8154_set_limit_logic
_8154_set_pcs_logic
_8154_set_ltc_logic
_8154_set_inp
_8154_set_erc
_8154_set_alm
_8154_set_pls_iptmode
_8154_set_pls_outmode
_8154_set_move_ratio
_8154_set_latch_source
_8154_set_feedback_src
_8154_set_home_config
_8154_set_soft_limit
_8154_set_fa_speed