ADLINK PCI-8154 - Manual (Page 107)

MotionCreatorPro 97
1. LTC Logic: Select the logic of the LTC signal. The
related function call is _8154_set_ltc_logic().
2. LTC latch_source: Select the logic of the latch_source
signal. The related function call is
_8154_set_latch_source().
3. SD Configuration: Configure the SD signal. The related
function call is _8154_set_sd().
4. PCS Logic: Select the logic of the SelectNo signal. The
related function call is _8154_set_pcs_logic().
5. Set gpio input: Select the configurations of the gpio
input. The related function call is
_8154_set_gpio_input_function.
6. Gpio Logic: Select the logic of the gpio. The related
function call is _8154_set_gpio_input_function.
7. Buttons:
Z Next Card: Change operating card.
Z Next Axis: Change operating axis.
Z Save Config: Save current configuration to 8154.ini And
8154MC.ini.
8. I/O Status: The status of motion I/O. Light-On means
Active, while Light-Off indicates inactive. The related
function is _8154_get_io_status