Bottom surface, Air intake area (fiiter), Cautions – Ask Proxima D-ILATM Pro AV SX1 User Manual
Page 8: Opening for replacing the lamp, Fixing foot, Controls and features (cont.)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Controls and Features (cont.)
Bottom Surface
Air intake area (fiiter)
Air is taken in through this area to cool the lamp. If this
area is blocked or if something that obstructs taking in or
exhausting air is placed around the projector, heat may
build up inside and could cause a fire. For details, refer to
“Precautions for Installation” on page 15.
CAUTIONS
' Be careful as paper, cloth or soft cushion could be drawn in
if placed nearby. Do not block the intake area, or heat may
build up and could cause a fire.
' Clean the filter periodically. For details, refer to “Cleaning and
Replacing the Filter” on page 51.
Deposition of dirt on the filter works to reduce the cooling
effect, causing heat to build up inside, which could cause a
fire or malfunction.
Opening for replacing the lamp
For replacing the lamp, refer to “Replacing the Lamp” on
page 48.
Fixing foot