Ask Proxima D-ILATM Pro AV SX1 - Manual (Page 33)

Operating the Main Menu (Cent.)
Configuration of the Main Menu (Computer input)
Main menu (Computer inputs : During PC IN-1 or PC IN-2 Input signal)
—jSOUNDl
OPTIONS I
[ PIXEL CLOCigiRACKING
PHASE
[ POSITION I V. POS.
H. POS.
PICTURE BRIGHTNESS
CONTRAST
R-GAIN
G-GAIN
B-GAIN
TEXT MODE
ALL RESET
TREBLE
BASS
MENU AUTO OFF
LINE DISPLAY
RIGHT LEFT REV.
TOP BOTTOM INV.
CLAMP
RESIZE
BACK COLOR
COLOR TEMP.
The lateral size and display area of video image are adjusted.
Flickering or dim video image is adjusted.
The vertical position of the video image being projected is adjusted.
The horizontal position of the video image being projected is adjusted.
The brightness of the video image being projected is adjusted.
The contrast of the video image being projected is adjusted.
The gain in red signal of the video image being projected is adjusted.
The gain in green signal of the video image being projected is adjusted.
The gain in blue signal of the video image being projected is adjusted.
Adjust easiness for reading text during RESIZE.
Normal : Normal
Text 1 : Display the outline of small letters already.
Text 2 : Makes the outline of iarge ietters sharp.
; All the items adjusted are reset.
: The treble of the audio sound being input is adjusted.
: The bass of the audio sound being input is adjusted.
Sets whether to turn off menu display automatically (YES) or not (NO).
Sets whether to make the line display effective (ON) or not (OFF) for about 5 seconds after input
switching.
Image is reversed right-to-left (for upside-down hanging (ceiling)).
Image is inverted top-to-bottom (for upside-down hanging (ceiling)).
Sets the clamp pulse’s position at the back porch (BP) or on the sink tip (ST). Normally, the clamp
pulse is used at BP. If, with some PCs or workstations, the screen becomes unstable such as
being too dark or too bright, try to switch to ST.
When the number of pixels (resolution) sought by the video image input is smaller than that
(resolution) of D-iLA device, the video image is then enlarged to a virtually full screen size of D-ILA
device and projected. (Resizing indication)
Specifies the background color when there is no image signal. Background color can be selected
from BLUE, CYAN, BLACK, GREEN, MAGENTA, RED. and YELLOW.
Adjusts the color temperature of the video image being projected. Make adjustment when the
video image becomes reddish or bluish.
Color temperature can be set to LOW, MIDDLE, or HIGH.
ASPECT CHANGE : Selects the vertical-to-horizontal ratio of the video image projected. The factory-set ratio is 4 : 3.
When projecting high-vision image, a ratio of 16 : 9 can be selected.
SLEEP TIME : Sets the length of sleep time. Aset sleep time after input signal is depleted, the projector goes into
a stand-by state. Sleep time can be selected from 10 minutes, 20 minutes, 30 minutes, and 60
minutes.
LAMP TIME : Indicates accumulated used hours of the light-source lamp.
[ SOURC e I : Normally set to AUTO. If the image is unstable, or does not display color, select the input source from the list.
I DECODE^ : Does not work with computer inputs. (The color system is indicated in gray.)
[ LANGUAG~E~| : Text on the screen can be changed to a language other than English. Languages that can be displayed are the
following six : 0:$;^ (Japanese), ENGLISH, DEUTSCH (German), ESPAÑOL (Spanish), ITALIANO (Italian), and
FRANÇAIS (French). However, some text such as “QUICK ALIGNMENT”, etc. are shown only in English.
33