Ask Proxima D-ILATM Pro AV SX1 - Manual (Page 35)

Operating the Main Menu (Cent.)
Changing the Color System
Remote control unit AUTO is set for the color system when the projector is shipped from
the factory. Normally, use it in AUTO. If operation in AUTO is unstable
such as with color not being shown, set to a dedicated color system
in accordance with the color system of the signal being input.
Press the MENU/ENTER button.
• The main menu is shown on the screen.
O Select “DECODER” with the cursor
^ button
A or T.
• The selected item (displayed in text) is shown in magenta color
on the screen.
Q Set the color system with the cursor
^
button ◄ or ►.
• Each time you press the cursor button ◄ or ►, the color system
changes as follows.
► : Forward / ◄ : Backward
AUTO............................ Normally, set to AUTO. The color
system of a signal being input is
automatically identified.
NTSC............................ Dedicated to NTSC.
Main menu
NTSC4.43.................... Dedicated to NTSC4.43.
I
PAL Dedicated to PAL.
When computer signal is input, the display of the color system
is changed to gray color, making operation impossible. When
video signals from AV devices are input, the item for the
color system can be set.
SECAM.........................Dedicated to SECAM.
About automatic signal identification
• AUTO is selected when shipped from the factory. In AUTO, the color system
(DECODER) of the signal being input is automatically identified and indicated
in ( ). Refer to the main menu display.
• If operation in AUTO is unstable such as with color not being shown, set to a
dedicated color system in accordance with the color system of the signal
being input. When the dedicated color system is set, be careful as automatic
identification does not work.
• To finish the m ain m enu, press the PAG E BACK
button.
35