Ask Proxima D-ILATM Pro AV SX1 - Manual (Page 27)

Basic Operations (Cont.)
Remote control unit
' COMPUTER button
'VIDEO button
• ZOOM (TAW) buttons
Projector’s buttons
m m m m m m m m ie%
stand by t!) O ^
P
operate
lamp replace CD
temperature ( )
emergency
“video” button
“computer” button
ATTENTIONS
DO NOT give any shock to this projector while
operating it; otherwise, the lamp goes off (the
“emergency” indicator lights up).
if the shock turns off the lamp —
Turn off the power by pressing the MAIN POWER
switch, then turn it on again. Now you can operate
the projector as usual.
2. Select the video input to be projected
■ Press the VIDEO (or “video”) button or the
COMPUTER (or “computer”) button to switch the
input.
• Each time you press either button, the selected input changes as
follows,
■ When you press VIDEO (or “video”):
Y/C .. ..... . .... ... . VIDEO -- --------XP b /B-YP r /R-Y
When you press COMPUTER (or “computer”):
COMPUTER 1 ....................... ► COMPUTER 2
Remote control unit Projector
COMPUTER VIDEO
dJ CTD
Screen display
When the input is switched, the line display (ex. VIDEO) and
the source display (ex. NTSC) are shown on the upper part of
the screen (they disappear in about five seconds). However,
they will not be shown if LINE DISPLAY in “Setting and Adjusting
Other Functions (OPTIONS)” on page 43 is set to OFF.
(For setting the source, see page 46.)
' To select the proper audio input for video input
The video input terminal (AV IN input terminal) can be switched with the
VIDEO (or “video") button. However, since this projector has only a single
audio input terminal, reconnect audio input in accordance with the AV device
to be used.
3. Adjust the screen size
Adjust the screen size with the remote control’s ZOOM
(T/W) buttons.
■ To enlarge the screen size:
Press the ZOOM (W) button.
■ To reduce the screen size:
Press the ZOOM (T) button.
Remote control unit
' The adjustment of the screen size (zoom adjustment) can also be made on
the setting menu.
For operating the setting menu, refer to “Making Basic Settings” on page 31.
27