Ask Proxima D-ILATM Pro AV SX1 - Manual (Page 46)

Operating the Main Menu (Cent.)
Changing (Setting) the Source
Remote control unit
Normally set to AUTO. If the image is unstable, or does not display
color, select the input souce from the list.
' When shipped from the factory, the source settings are as follows:
MENU/ENTER
button
Cursor buttons
PAGE BACK button
Input mode Factory setting Input mode Factory setting
VIDEO NTSC COMPUTER 1 AUTO
Y/C NTSC COMPUTER 2 AUTO
Y, P b /B-Y, P r /R-Y AUTO — —
■ Depending on the signal from a device connected, adjustment may be needed
after a dedicated source is set. If that is the case, adjust the appropriate
items.
' When the input mode (SOURCE) is VIDEO or Y/C, and if AUTO is set, the
automatic detecting function may work, possibly causing the screen to be
intermitted or disturbed, in that case, set to a dedicated source (forced mode).
' When special effect playback (fast-forward/ twice-speed/triple-speed) is
performed on a video deck, etc, the picture may be disturbed or intermitted,
depending on the device.
Press the MENU/ENTER button.
• The main menu appears on the screen.
2 Select a submenu item “SOURCE”
^ using the cursor button
a
or
t .
• The SOURCE item (shown in text) is indicated in magenta color.
IMain menu
2 Press the MENU/ENTER button.
•The submenu items, SOURCE menu, appears on the screen.
A U T O ( N T S C )
□ p i x e l c l o c k
□ p o s i t i o n
□ p i c t u r e
□ s o u n d
...Qaaiiims----------
□ S O U R C E
D E C O D E R A U T O ( N T S C )
L A N G U A G E E N G L I S H
Submenu item [SOURCE]
j ( A U T O ) ] ---------------------------------------------------------------
□ a u t o □ S V G A I
□ n t s c □ S V G A 2
□ P A L / S E C A M □ M A C 1 6
Q E D T V I I g X G A I
Q h d t v □ X G A 2
O P C - 9 8 Q M A C 1 9
□ V G A I □ M A C 2 1
O V G A 3 Q S X G A 1
□ M A C 1 3 g S X G A 2
□ V G A V E S A Q S X G A 3
-The display in ( ) shows
the currently set status.
(SOURCE menu)
Select the item to set using the cursor
buttons
A/T or ◄/►.
• The item to set is shown in magenta color.
' The selected item is shown in magenta color. Items shown
in gray color cannot be operated or set in the current mode.
' Items that can be set are different when AV signals are input
and when computer signals are input.
' For dedicated source signals (corresponding frequency, etc.)
for computer signals, see page 19.
□ s o u r c e
( A U T O )
□ a u t o
□ n t s c
□ P A L / S E C A M
□ E D T V I I
□ H D T V
□ P C - 9 8
Q V G A I
□ V G A 3
□ M A C I 3
□ V G A V E S A
□ S V G A I
□ S V G A 2
Q ) M A C 1 6
□ X G A 1
□ X G A 2
Q M A C I 9
□ M A C 2 1
□ S X G A 1
□ S X G A 2
y S X G A 3
46