Aiwa LCX-301 - Manual (Page 36)

ID
I
CARE AND MAINTENANCE
Occasional care and maintenance of the unit and the software
are needed to optimize the performance of your unit.
To clean the cabinet
Use a soft cloth lightly moistened with mild detergent solution.
Do not use strong solvents, such as alcohol, benzine or thinner.
To clean the heads and tape paths ES
After every 10 hours of use, clean the heads and tape paths with
a head cleaning cassette or cotton swab moistened with cleaning
fluid or denatured alcohol. (These cleaning kits are commercially
available.)
When cleaning with a cotton swab @, wipe the recording/
playback head ®, erasure head ©, capstans @, and pinchrollers
®.
After cleaning the heads and tape paths with a liquid head
cleaning cassette or a moistened swab, wait until the cleaned
parts are completely dried before inserting the tapes.
To demagnetize the heads
The heads may become magnetized after long-term use. This
may narrow the output range of recorded tapes and increase
noise. After 20 to 30 hours use, demagnetize the heads with
any commercially available demagnetizer.
Care of discs □
• When a disc becomes dirty, wipe the disc from the center out
with a cleaning cloth.
• After playing a disc, store the disc in its case. Do not leave the
disc in places that are hot or humid.
SPECIFICATIONS
MAIN UNIT
Tuning range
^
Usable sensitivity(IHF)
Antenna terminals
87.5 MHz to 108 MHz
13.2 dBf
75 ohms (unbalanced)
Tuning range
531 kHz to 1602 kHz (9 kHz step)
530 kHz to 1710 kHz (10 kHz step)
Usable sensitivity 350 pV/m
Antenna Loop antenna
(for K model)
Tuning range
144 kHz to 290 kHz
Usabie sensitivity 1400pV/m
Antenna Loop antenna
Power output
U:
8W + 8W(1 kHz, T.H.D. 10%, 6 ohms)
LH:
8 W + 8 W (6 ohms, T.H.D. 10%)
K:
Rated: 6 W -r 6 W (6 ohms, T.H.D. 1 %, 1
kHz/DiN 45500)
Reference: 8 W + 8 W (6 ohms, T.H.D.
10%, 1 kHz/DIN 45324)
DIN MUSIC POWER 16 W + 16 W
36
To be continued.