Microphone mixing, Before connecting a microphone, 1 connect your microphone to the mic jack – Aiwa LCX-301 User Manual
Page 32: 3 adjust the volume and tone of the source, To record microphone sound mixed with source sound, When not using the microphones, Recommended microphone
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
I
MICROPHONE MIXING
4
1
j
A microphone (not supplied) can be connected to this unit,
allowing you to sing along to music sources.
Use a microphone with a mini plug (03.5 mm,Vs inch).
Before connecting a microphone
Set the MIC VOL control to MIN.
1 Connect your microphone to the MIC jack.
2 Press one of the function buttons to select the
source to be mixed, and play the source.
3 Adjust the volume and tone of the source.
4 Adjust the microphone volume with the MIC VOL
control.
To record microphone sound mixed with source sound
Follow the procedure for recording from the source.
When not using the microphones
Set the MIC VOL control to MIN and remove the microphones
from the MIC jacks.
BAND
TUNER
4
VIDEO
AUX
[ZZI
• If the microphone is held too near the speakers, a howling sound
may be produced. In this case, hold the microphone away
from the speakers, or decrease the sound level using the MIC
VOL control.
• If sound through the microphone is extremely loud, it may be
distorted, in this case, turn the MIC VOL control toward MIN.
Recommended microphone
Use of a unidirectional type microphone is recommended to
prevent howling. Contact your local Aiwa dealer for details.
32