Programmed play, 3 repeat step 2 to program other tracks, 4 press the button to start play – Aiwa LCX-301 User Manual
Page 26: To check the program, To clear the program, To add tracks to the program, To change the programmed tracks
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
■
PROGRAMMED PLAY
1
1
2
4
Up to 20 tracks can be programmed from the inserted disc.
Use the remote control.
1 Press the PRGM button while pressing the SHIFT
button in stop mode.
The PRGM indicator flashes in the display.
2 Press the numeric buttons and the +10 button to
program a track.
Example:
To select the 25th track, press the +10, +10 and 5 buttons.
To select the 10th track, press the +10 and 0 buttons.
DISPLAY
(D
Program number
@ Selected track number
(D Total playing time of the selected tracks
@ Total number of selected tracks
3 Repeat step 2 to program other tracks.
4 Press the button to start play.
To check the program
Each time the ◄◄ or ►► button is pressed before playing, a
track number, and program number will be displayed.
To clear the program
Press the ■ CLEAR button In stop mode.
To add tracks to the program
Before playing, repeat step 2. The track will be programmed after
the last track.
To change the programmed tracks
Clear the program and repeat all the steps again.
>
During programmed play, the following operations cannot be
performed:
-Random play with the RANDOM button
-One-track repeat (REPEAT 1) with the REPEAT button
>
If programmed time is more than 99:59 minutes, or the disc
track number 31 and above is programmed, total playing time
shows — : — in the display.
26