Presehing stations, 2 press the ii set button to store the station, 3 repeat steps 1 and 2 – Aiwa LCX-301 User Manual
Page 20: Preset number tuning^ a, 1 press the band button to select a band, Selecting a preset number on the main unit, To clear a preset station, Presetting stations preset number tuning, T~ j
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
RADIO RECEPTION
PRESEHING STATIONS ^ □
T~
J '
SET
@
n ~t n
1 /
J
"»
.U umir
[SlìRÉÒl
■ r Iwl
1
-
r 1 1
_/
(D
The unit can store a total of 32 preset stations. When a station
is stored, a preset number is assigned to the station. Use the
preset number to tune in to a preset station directly.
1 Press the TUNER/BAND button to select a band,
and press the DOWN or UP button to
select a station.
2 Press the II SET button to store the station.
A station is assigned to a preset number, beginning from 1 in
consecutive order for each band.
DISPLAY
(T)The frequency
@ The preset number
(3) The preset numbers
The selected preset number flashes.
3 Repeat steps 1 and 2.
The next station will not be stored if a total of 32 presef stations
have already been stored for all the bands.
Each band can only store a maximum of 16 preset stations.
2
II str -
I CLEAR
PRESET NUMBER TUNING^ a
Use the remote control to select the preset number directly.
1 Press the BAND button to select a band.
2 Press the numeric buttons to select a preset
number.
Example:
To select preset number 10, press the +10 and 0 buttons.
Selecting a preset number on the main unit
Press the TUNER/BAND button to select a band. Then, press
the DIR/PRESET button repeatedly.
Each time the button is pressed, the next higher number is
selected.
To clear a preset station
Select the preset number of the station to be cleared. Then,
press the ■ CLEAR button, and press the II SET button within 4
seconds.
The preset numbers of all other stations in the band with higher
numbers are also decreased by one.
20