YSI MultiLab 4010-3 - Manual (Page 97)

MultiLab 4010-3 Settings
ba76143e03 08/2013 97
10.6.2 Data storage
This menu contains all functions to display, edit and erase stored measured
values.
10.6.3 Automatic Stability control
The automatic Stability control (AutoRead) function continuously checks the
stability of the measurement signal. The stability has a considerable impact on
the reproducibility of measured values.
You can activate or switch off the automatic Stability control function (see
section 10.6 S
ENSOR
-
INDEPENDENT SETTINGS
, page 96).
The measured parameter flashes on the display

as soon as the measured value is outside the stability range
 when you switch over between the measured parameters with .
 when the automatic Stability control is switched off.
Detailed information on the memory functions of the
MultiLab 4010-3 are given in section 11 D
ATA STORAGE , page 102.