YSI MultiLab 4010-3 - Manual (Page 18)

Operation MultiLab 4010-3
18 ba76143e03 08/2013
4.1.7 Display of several sensors in the measuring mode
The measured values of the connected sensors can be displayed in the follow-
ing ways:
 Clear display of all connected sensors
 Detailed display of one sensor
(e.g. incl. CMC feature with pH sensors)
With the softkey you can very easily switch between the two display types. The
suitable softkey is displayed depending on the operating situation.
2. Display further sensor data (settings) with [More].
01.08.2013 08:00 More
4110
B092500013
01.08.2013 08:00
Man. temperature: 25 °C
pH resolution 0.001
mV resolution 0.1
Buffer YSI
Calibration interval 7d
Unit for slope mV/pH
QSC: off
Software version 1.00
4110
B092500013
01.08.2013 08:00 Info
760 mmHg
01.08.2013 08:00 Info