YSI MultiLab 4010-3 - Manual (Page 26)

Operation MultiLab 4010-3
26 ba76143e03 08/2013
4. Change and confirm the setting with <><> and .
The minutes are highlighted.
5. Change and confirm the setting with <><> and .
The seconds are highlighted.
6. Change and confirm the setting with <><> and .
The time is set.
7. If necessary, set the Date and Date format. The setting is made simi-
larly to that of the time.
8. To make further settings, switch to the next higher menu level with
.
or
Switch to the measured value display with .
The instrument is in the measuring mode.