YSI MultiLab 4010-3 User Manual
Page 90
Settings
MultiLab 4010-3
90
ba76143e03
08/2013
Calibration /
Calibration data stor-
age /
Display
-
Displays the calibration
record.
Further options:
Scroll through the cali-
bration records with
<><>.
Output the displayed cal-
ibration record to the
interface with
[USB-Ausgabe].
Output all calibration
records to the interface
with
gabe].
Quit the display with
Switch directly to the
measured value display
with
Calibration /
Calibration data stor-
age /
Output to RS232/
USB
-
Outputs the calibration
records to the interface.
Man. temperature
-25 ... +25 ... +130 °C
Entry of the manually deter-
mined temperature. For
measurements without tem-
perature sensor only.
Alternative tempera-
ture
on
off
Takes the measured tem-
perature value from an IDS
sensor.
This menu item is only avail-
able if an IDS adapter and
an IDS sensor with temper-
ature sensor are connected.
Temperature from
channel
▭▭▬
▭▬▭
▬▭▭
Selection of the channel
from which the temperature
value should be taken over.
This menu item is only avail-
able if two IDS sensors are
additionally connected.
ISE setup /
AutoRead criterion
low
medium
high
Selection of the AutoRead
criteria (see section 7.1.1
M
Menu item
Possible setting
Description