YSI MultiLab 4010-3 - Manual (Page 101)

MultiLab 4010-3 Settings
ba76143e03 08/2013 101
10.7.2 Resetting the system settings
The following system settings can be reset to the default condition:
The system settings are reset in the menu, Storage & config / System / Reset.
To open the Storage & config menu, press the key in the measured
value display.
Setting Default settings
Language English
Audio signal on
Baud rate 4800 Baud
Output format ASCII
Decimal separator Dot (xx.x)
Brightness 10
Temperature unit °C
Stability control on