YSI MultiLab 4010-3 - Manual (Page 16)

Operation MultiLab 4010-3
16 ba76143e03 08/2013
4.1.4 Instrument connectors
1 IDS sensors: (pH, ORP, conductivity, D.O.)
a) Channel 1
b) Channel 2
c) Channel 3
2 USB B (device) interface
3 Stirrer (ProOBOD)
4 USB-A (host) interface
5 Power pack
6 Service interface
7 Cover plate
The cover plate closes the mounting slot for the IDS adapter ( 4010-2/
3 pH Adapter DIN or 4010-2/3 pH Adapter BNC) available as an
accessory
CAUTION
Only connect sensors to the meter that cannot return any volt-
ages or currents that are not allowed (> SELV and > current cir-
cuit with current limiting).
YSI IDS sensors and IDS adapters meet these requirements.
7 4 6 3 5 1
b a c
2