Toa DP-SP3 User Manual
Page 9
8
9
6.2.2. Edit
Undo :
Cancels the previous operation and returns to the original state.
Repeat :
Repeats processing previously performed.
Cut :
Initializes the setting value after copying the setting value of the designated
box to the clipboard.
Copy :
Copies the setting value of the designated box to the clipboard.
Paste :
Pastes the clipboard data to the designated box.
Initial value :
Initializes the setting value of the box.
Set Grouping :
Performs the group setting of the box.
Release Grouping :
Cancels the group setting of the box.
Box Write Protect...
Off :
Sets no restriction on write to box.
Low :
Restricts the operator from changing the parameters set in the box.
Mid :
Restricts the operator from changing all settings in the box.
High :
Restricts the administrator from changing the parameters set in the box, and
the operator from changing all settings in the box.
6.2.3. View
Toolbar :
Shows or hides the toolbar.
Status Bar :
Shows or hides the status bar.
Unit View :
Shows or hides the unit view.
Contents View :
Shows or hides the contents view.
Response View :
Shows or hides the response view.
Preset View
Show/hide :
Shows or hides the preset view.
Floating :
Floats the preset view window.
Docking :
Docks the preset view window.
Mute View
Show/hide :
Shows or hides the mute view.
Floating :
Floats the mute view.
Docking :
Docks the mute view.
Level Monitor View :
Shows or hides the level monitor view.
6.2.4. Unit
Create New Unit... :
Creates a new unit.
Click the flow view screen on the main screen to create the first unit.
Delete Unit :
Deletes the unit from the setting data.
Change X-over
Combination... :
Changes crossover combinations.
Slope... :
Changes crossover slopes.
Filter split :
Changes split settings of the output stage filter box.
Names... :
Changes the names of the unit and its inputs and outputs.
Save as a Template
Unit Template... :
Stores equipment configuration settings as a template.
X-over Template :
Stores crossover settings as a template.
Input PAD settings :
Changes the input sensitivity of the unit.
6.2.5. preset
Change
Preset 1 – 16 :
Recalls one out of 16 preset memories.
Store
Preset 1 – 16 :
Writes setting contents in one of 16 preset memories.
Names... :
Changes the name of preset memory.
Switching Host... :
Make settings to permit the unit’s Preset memory to be switched synchronously
when the Preset memory is switched at the M-864D or other DP-SP3 (Master
device).