beautypg.com

Deleting the unit, Changing the crossover combinations, Changing the crossover slopes – Toa DP-SP3 User Manual

Page 15: Name setting, Storing the unit configuration as a template, Storing the crossover settings as a template

background image

14

15

7.2. Deleting the Unit

The unit configuration already created can be deleted only when the PC is not in communication with the DP-

SP3.

Select the unit to be deleted in the unit view or flow view.

Select [Unit

Delete Unit] from the menu to display a dialog for confirmation.

Clicking the OK button deletes the unit.

7.3. Changing the Crossover Combinations

The configuration crossover combination already created can be changed only when the PC is not in

communication with the DP-SP3.

Select the unit for which you want to change the crossover combination in the unit view or flow view.

Select [Unit

Change X-over

Combination] from the menu to display the Crossover Combination screen.

Crossover combination settings can be changed in the same procedures as for creating a new unit configuration.

7.4. Changing the Crossover Slopes

Select the unit for which you want to change the crossover slopes in the unit view or flow view.

Select [Unit

Change X-over

Slope] from the menu to display the Crossover Slope screen.

Crossover slope settings can be changed in the same procedures as for creating a new unit configuration.

7.5. Name Setting

Select [Unit

Names] from the menu to display the Name setting screen.

Enter a name in the “Unit name” field on the Name setting screen, click the [OK] button to display the name in

the unit field.

7.6. Storing the Unit Configuration as a Template

The set equipment configuration can be saved as a template in the unit view or flow view.

Select [Unit

Save as a Template

Unit Template] from the menu to display the file storing screen.

Enter a file name in the file name field, then click [Store].

7.7. Storing the Crossover Settings as a Template

The set crossover box (example:

) can be saved as a template in the unit view or flow view.

Select [Unit

Save as a Template

X-over Template] from the menu, and the file saving screen is displayed.

Enter a file name in the file name field, then click [Store].