Toa DP-SP3 - Manual (Page 31)

30 31
8.4.6. Delay view (Delay function settings)
If you click the box in the signal flow, the Delay View is displayed.
(1) (2)
(3)
(4)
(5)
(6)
(1) Minimum variation unit selection button
Selects the minimum units of the delay time that can be changed with the Up and Down buttons.
(2) Option button
If you click this button, a delay option dialog is displayed and you can
select the unit of distance displayed on the delay distance indication
button from meters, inches, and feet.
You can also set the temperature on the basis of which the delay
distance displayed on the delay distance indication button is
calculated.
(3) grouping button [grouping No.]
The group number is displayed when grouping has been set, and the “Off” indication is displayed when no
grouping has been set.
Clicking this button permits grouping to be set or cancelled on the pull-down menu.
If you increment or decrement the value of each setting item of the grouped channel, other setting values
assigned the same group also increment or decrement in synchronization.
Select either “New Group” or
the number of a group that has
already been set.
Only when “New Group” has been selected, select
either “Same Value” or “Keep Offset.”
Same Value: Makes gain value within the group
identical.
Keep Offset: Permits gain values to be changed
without changing the relative gain
values within the group set at the
time of group setting.