Toa DP-SP3 - Manual (Page 30)

30
[Time correction settings between Xover boxes]
If you click the [Driver Alignment] of the Display Switch tab, the setting screen for time correction between Xover
boxes is displayed.
(1) (2)
(3)
(4)
(5)
(6)
(1) Minimum variation unit selection button
Selects the minimum units of the delay time that can be changed with the Up and Down buttons.
(2) Option button
If you click this button, a delay option dialog is displayed and you can
select the unit of distance displayed on the delay distance indication
button from meters, inches and feet.
You can also set the temperature on the basis of which the delay
distance displayed is calculated.
(3) local grouping button [local grouping]
Displays grouping within the channels for which Crossover Setting
has been performed.
The group symbol is displayed when grouping has been set, and the
“Off” indication is displayed when no grouping has been set.
Clicking this button permits local grouping to be set or cancelled on
the pull-down menu.
(4) Delay time indication button [Time (ms)]
Displays the delay time in each channel by means of a numerical
value.
If you press this button, a dialog for delay time setting is displayed,
enabling you to set the delay time by directly entering a numerical
value.
(5) Delay distance indication button [Distance (meters/inches/feet)]
Displays the delay distance in each channel by means of a numerical
value.
If you click this button, a dialog for delay distance setting is displayed,
enabling you to set the delay distance by directly entering a numerical
value
(6) Up/Down button
Changes the delay time in minimum variation units. .