Toa DP-SP3 - Manual (Page 20)

20
8.4.1. Matrix view
Clicking the Matrix box in the signal flow causes the Matrix view to be displayed.
• A circle mark in the matrix control column shows input/output routing.
• The Matrix control turns on and off as it is double-clicked.
• A black, thicker frame on the Matrix control shows the selected matrix point.
• The level at the selected matrix point can be changed by moving a fader up or down.
• The level at the selected matrix point is displayed numerically on the Level setting button. Pressing this button
permits direct entry by a numerical value.
You can also change the level in 1 dB units with the Up and Down buttons located on the right side.
• The level setting at each matrix point is displayed numerically by clicking the [Numerical] button.
Matrix control Fader
Numerical value indication button Level setting button
Example of numerical display