Toa DP-SP3 - Manual (Page 14)

14
Step 7. Set the Input PAD.
7-1. Select “Unit Input Pad Settings” from the menu when the communication
with the DP-SP3 unit is disconnected.
The Input PAD Setting screen is displayed.
7-2. Set each input sensitivity of Inputs 1 and 2, then click the [OK] button.
PAD ON: +4 dB*
PAD OFF: –10 dB*
* 0 dB = 0.775 V
Note
Input PAD setting can be operated only when connection to the DP-SP3 unit is not established.
To reflect the settings to the DP-SP3 unit after setting completion, establish the connection to the DP-
SP3 unit, then send the set data. (See p. 53.)