Toa DP-SP3 - Manual (Page 18)

18
8.3. Flow View
The flow view displays the signal processing image
indicated by a signal flow chart consisting of the signal
processing functional boxes and input-to-output lines
connected between them.
* 1 Double-clicking on the mute box of the output displays “\” mark in the box, and switches the mute function for
that channel to OFF.
Mute ON :
Mute OFF :
Double-clicking the Mute ON box again switches the mute function to OFF.
Crossover (Xover) (See p. 27.)
: Low-pass filter
: High-pass filter
: Band-pass filter
(High-pass filter + low-pass filter)
Delay (See p. 31.)
Attenuator (See p. 33.)
Mute* 1
Signal indicator* 2
Unit name (See p. 16.)
Gain (See p. 21.) Compressor (See p. 23.)
Filter (See p. 25.)
Matrix (See p. 20.)
Flow view