Toa DP-SP3 - Manual (Page 19)

18 19
* 2 The display of the signal indicator changes depending on the signal levels at the input and output while the
PC is in communication with the DP-SP3.
• The indicator LEVEL A indicates the signal level immediately after analog-to-digital conversion obtained from
the unit.
• The indicator LEVEL B indicates the signal level obtained by adding the input gain value to the LEVEL A signal
level.
• The indicator LEVEL C indicates the signal level immediately before digital-to-analog conversion obtained
from the unit.
• The indicator LEVEL D indicates the signal level obtained by adding the output attenuator value to the LEVEL
C signal level.
Red: Signal level is 18 dB or more.
Yellow: Signal level is 12 dB or more and less than 18 dB.
Green: Signal level is –40 dB or more and less than 12 dB.
8.4. Contents View
Clicking each box in the flow view causes each corresponding view to be displayed at the lower area of the flow
view.
LEVEL C
LEVEL D
LEVEL B
LEVEL A
Contents view area
Flow view