Toa DP-SP3 - Manual (Page 38)

38
8.6.4. Names
Step 1. Select [Preset Names...] from the menu.
The Name Preset Setting screen is displayed.
Step 2. Enter the name, then click the [OK] button.
Note: Up to 20 alphanumeric characters can be used.
8.6.3. preset Memory settings at power-on
Select “Preset Power On” from the menu, then select “Resume,”
“Last Preset,” or “Preset 1 to 16” (Preset number).
Resume: Activates the DP-SP3 in the state just before power-
off.
Last Preset: Activates the DP-SP3 with the Preset memory
setting data selected just before power-off.
Preset 1 – 16: Activates the DP-SP3 with the setting data of the
selected Preset memory.
After completion of the setting, establish connection with the DP-SP3
(See p. 53.) and send the set data to it. Then, the setting contents
are reflected in the DP-SP3 when its power is switched on next time.