CITIZEN CT-S300 - Manual (Page 61)

— 56 —
Bit Status Hex. Decimal
0 Unused 00 0
1 Unused 00 0
2
Status of pin 3 of drawer kick-out connector = “L” 00 0
Status of pin 3 of drawer kick-out connector = “H” 04 4
3
Online status 00 0
Offline status 08 8
4 Unused 01 16
5
Cover closed 00 0
Cover open 20 32
6
Not in paper feed state triggered by FEED switch 00 0
In paper feed state triggered by FEED switch 40 64
7 Unused 00 0
(1) 1st byte (Printer information)
(3) 3rd byte (Paper Sensor information)
(2) 2nd byte (Error occurrence information)
Bit Status Hex. Decimal
0 Undefined — —
1 Undefined — —
No B.M detection error occurred
2
(only when B.M paper is selected).
00 0
A B.M detection error occurred
(only when B.M paper is selected).
04 4
3
Auto cutter error not occurred 00 0
Auto cutter error occurred 08 8
4 Unused 00 0
5
Unrecoverable error not occurred 00 0
Unrecoverable error occurred 20 32
6
Auto recovery error not occurred 00 0
Auto recovery error occurred 40 64
7 Unused 00 0
Bit Status Hex. Decimal
0, 1
Paper found by Paper Near-end Sensor 00 0
Paper not found by Paper Near-end Sensor 03 3
2, 3
Paper found by Paper-end Sensor 00 0
Paper not found by Paper-end Sensor 0C 12
4 Unused 00 0
5 Undefined — —
6 Undefined — —
7 Unused 00 0