CITIZEN CT-S300 - Manual (Page 27)

— 22 —
ESC M n
[Function] Selection of character fonts
[Code] <1B>H<4D>H
[Range] 0 n 2
48 n 50
[Outline] Selects character fonts.
[Caution] • ESC ! can also select fonts, but the setting made by the command that has last
been processed becomes valid.
• In case font C selection ESC R is other than n = 8 (katakana), codepage PC437 is
printed.
• In case ESC R is n = 8 (katakana), codepage katakana is printed.
[Default] n = 0
[See Also] ESC !
ESC R n
[Function] Selecting the international character set
[Code] <1B>H<52>H
[Range] 0 n 13
[Outline] Depending on the value of “n”, one of the following character sets is specified;
n Function
0, 48 Selection of font A (12
× 24)
1, 49 Selection of font B (9 × 24)
2, 50 Selection of font C (8
× 16)
[Default] n = 0 (Overseas), n = 8 (Domestic)
[See Also] 3.2 “International Character Code Table”
n Character Set n Character Set
0 U.S.A. 7 Spain I
1 France 8 Japan
2 Germany 9 Norway
3 U.K. 10 Denmark II
4 Denmark I 11 Spain II
5 Sweden 12 Latin America
6 Italy 13 Korea