CITIZEN CT-S300 - Manual (Page 30)

— 25 —
ESC { n
[Function] Specifying/canceling the inverted characters
[Code] <1B>H<7B>H
[Range] 0 n 255
[Outline] Specifying/canceling inverted characters.
• “n” is valid only for the lowest bit (n0).
• Control by the lowest bit (n0) is shown as follows:
[Caution] • This command is valid only when it is specified at the beginning of a line.
• This command does not affect the PAGE MODE.
[Default] n = 0
[Sample Program]
LLPRINT CHR$(&H1B);"{";CHR$(0);
LPRINT "TEN";CHR$(&HA);
LPRINT "ELEVEN";CHR$(&HA);
LPRINT CHR$(&H1B);"{";CHR$(1);
LPRINT "TEN";CHR$(&HA);
LPRINT "ELEVEN";CHR$(&HA);
[Print Results]
n0 Condition
0 Canceling inverted characters.
1 Specifying inverted characters.
Paper feed direction
Inversion canceled
Inversion specified