Esc = n – CITIZEN CT-S300 User Manual
Page 125
— 120 —
ESC = n
[Function]
Data input control
[Code]
<1B>H<3D>H
[Range]
0 n 255
[Outline]
• Selecting equipment for which data input from the host is valid.
• Each bit of “n” indicates as follows.
• When the printer has not been selected, this printer abandons all the received data
until it is selected by this command.
[Caution]
• Even when the printer has not been selected, it can become BUSY state through
printer operation.
• When the printer is deselected, this printer discards all the data until it is selected
with this command. (Except DLE EOT, DLE ENQ, and DLE DC4)
[See Also]
n = 1
Bit
Equipment
Value
0
1
0
Printer
Invalid
Valid
1
Not defined
—
—
2
Not defined
—
—
3
Not defined
—
—
4
Not defined
—
—
5
Not defined
—
—
6
Not defined
—
—
7
Not defined
—
—