CITIZEN CT-S300 - Manual (Page 25)

— 20 —
ESC E n
[Function] Specifying/canceling emphasis printing
[Code] <1B>H<45>H
[Range] 0 n 255
[Outline] Specifying/canceling the emphasized characters.
• “n” is valid only for the lowest bit (n0).
• Control by the lowest bit (n0) is shown as follows:
[Caution] • Emphasis printing can also be specified/canceled by ESC ! but the setting of
command last processed is valid.
• Valid for all character types except HRI characters.
[Default] n = 0
[See Also] ESC !
[Sample Program]
LPRINT CHR$(&H1B);"E";CHR$(0);
LPRINT "AAABBB";CHR$(&HA);
LPRINT CHR$(&H1B);"E";CHR$(1);
LPRINT "AAABBB";CHR$(&HA);
[Print Results]
AAABBB
← Emphasis canceled
AAABBB
← Emphasis specified
n0 Function
0 Canceling emphasis printing
1 Specifying emphasis printing