CITIZEN CT-S300 - Manual (Page 26)

— 21 —
ESC G n
[Function] Specifying/canceling double strike printing
[Code] <1B>H<47>H
[Range] 0 n 255
[Outline] Specifying/canceling the double strike printing.
• “n” is valid only for the lowest bit (n0).
• Control by the lowest bit (n0) is shown as follows:
n0 Function
0 Canceling double strike printing
1 Specifying double strike printing
[Caution] • With this printer, double-strike printing and emphasis printing provide completely
the same results.
• Valid for all character types except HRI characters.
[Default] n = 0
[See Also] ESC E
[Sample Program]
LPRINT CHR$(&H1B);"G";CHR$(0);
LPRINT "AAABBB";CHR$(&HA);
LPRINT CHR$(&H1B);"G";CHR$(1);
LPRINT "AAABBB";CHR$(&HA);
[Print Results]
AAABBB
← Double strike printing canceled
AAABBB
← Double strike printing specified