CITIZEN CT-S300 - Manual (Page 126)

— 121 —
A A A
ESC @
[Function] Initializing the printer
[Code] <1B>H<40>H
[Outline] Clears data stored in the print buffer and brings various settings to the initial state
(Default state).
[Caution] • The settings of DIP switches are not read again.
• Data inside the internal input buffer is not cleared.
• Macro definitions are not cleared.
• NV bit image definitions are not cleared.
• Data in the user NV memory is not cleared.
[Sample Program]
LPRINT CHR$(&H1B);"!";CHR$(&H30);
LPRINT CHR$(&H1B);"V";CHR$(1);
LPRINT "AAA";CHR$(&HA);
LPRINT CHR$(&H1B);"@";
LPRINT "AAA";CHR$(&HA);
[Print Results]
A A A
Each setting has been initialized by this command.