RED DSMC POWER - Manual (Page 47)

COPYRIGHT © 2014 RED.COM, INC
RED DSMC POWER OPERATION GUIDE
955-0038, REV-F | 47
RED ® offers a wide variety of performance power adaptors, cables, and accessories to power and provide sup-
port for the DSMC ® , power modules, and other DSMC components.
This chapter provides information on the following:
“AC Power Adaptor (DSMC)” on page 47
“RED Cradle” on page 48
“RED Quickplate” on page 48
“Battery Belt Clip (DSMC)” on page 49
“EVF/LCD Cables” on page 50
“4-Pin to 2-Pin Adaptor Cable” on page 51
“2B-to-1B Power Adaptor Cable” on page 51
“Pro I/O Aux Power Out + GPIO Cable (6’)” on page 51
“XLR Power Cable” on page 51
POWER ADAPTORS AND ACCESSORIES
This section describes power accessories that provide external power options for the DSMC system.
AC POWER ADAPTOR (DSMC)
The AC Power Adaptor (DSMC) provides a maximum sustained power load of 150 W (15 V @ 10 A) for continu-
ous shooting. An industry-standard 1B LEMO connector attaches directly to the DSMC BRAIN.
The output of the AC Power Adaptor (DSMC) is over current protected, and the adaptor shuts down if an excess
load condition occurs. If the output trips for any reason, remove any external loads from the camera (such as
lights, motors, etc) and unplug the adaptor.
AC Power Adaptor
(DSMC)
06
POWER ADAPTORS, CABLES,
AND ACCESSORIES