Dsmc adaptor operations, Install the +1 adaptor module, Red dsmc power operation guide – RED DSMC POWER User Manual

Page 21

Text mode
Original mode

RED DSMC POWER OPERATION GUIDE

955-0038, REV-F

DSMC ADAPTOR OPERATIONS

This section describes the installation and removal of DSMC module adaptors.

INSTALL THE +1 ADAPTOR MODULE

REQUIRED TOOL: T20 Torx driver
1. Turn off the BRAIN.
2. Remove the REDMOTE, if attached.
3. Position the +1 Adaptor Module over the V-mount on the rear of the BRAIN.

4. Insert the HDMI connector into the HDMI port on the BRAIN.

Install the +1 Module

Adaptor

Insert the HDMI

Connector to the

BRAIN