RED DSMC POWER - Manual (Page 39)

RED DSMC POWER OPERATION GUIDE
COPYRIGHT © 2014 RED.COM, INC 955-0038, REV-F | 39
REDVOLT LED ARRAY
`v
The REDVOLT and REDVOLT XL battery LED arrays consist of three (3) LEDs and a status button. Press the
status button to illuminate the LEDs, displaying the remaining battery charge level in 33.3% steps. If a single
LED blinks or no LEDs illuminate, then the battery is discharged and requires charging.
RED BRICK
The RED BRICK uses multiple lithium-ion rechargeable cells to provide long-term battery power to the DSMC
BRAIN for extended shooting sessions. RED BRICK batteries can be attached to the BRAIN or equipment using
a V-Mount battery plate and can also be used to power specific DSMC modules.
Charge the RED BRICK battery with the RED BRICK Charger. For more information, go to
“RED BRICK Charger”
on page 44 .
NOTE: RED BRICK batteries require a RED BRICK Charger to recharge the battery.
REDVOLT LED Array
RED BRICK