Redvolt travel charger, Redvolt travel charger led indicator, Recharge a redvolt battery – RED DSMC POWER User Manual
Page 42: Red dsmc power operation guide

COPYRIGHT © 2014 RED.COM, INC
RED DSMC POWER OPERATION GUIDE
955-0038, REV-F
|
42
REDVOLT TRAVEL CHARGER
`
The REDVOLT Travel Charger is a compact and portable charger designed to charge a single REDVOLT lithium-
ion battery. The charger times out automatically after 105 minutes if the battery does not reach a full charge.
NOTE: The REDVOLT Travel Charger stops charging automatically if battery temperature exceeds 40˚C (104˚F),
or drops below 0°C (32°F).
REDVOLT TRAVEL CHARGER LED INDICATOR
The REDVOLT Travel Charger LED indicator displays a specific color and pattern indicating the state of charge.
COLOR PATTERN
DESCRIPTION
Green
Charger on, battery fully charged
Red/Green flashing (alternating)
Charger on, fail condition
Red
Charger on, no battery connected
Amber flashing
Charger on, battery connected and charging
RECHARGE A REDVOLT BATTERY
1. Connect the REDVOLT Travel Charger to 100–240 VAC, 50/60 Hz power outlet.
2. Lower the REDVOLT directly onto the charger.
3. Apply pressure until an audible click is heard and the battery is fully seated.
WARNING: DO NOT insert a REDVOLT at an angle or connector side first. This may cause damage the bat-
tery connector or charger.
4. Charge the battery until the LED indicator turns green, signalling a fully charged battery.
5. Remove the battery from the charger.
REDVOLT Travel Charger