Ethernet tests – PRG S400 User Manual 3.1 User Manual
Page 54
48
PRG SERIES 400
®
POWER AND DATA DISTRIBUTION SYSTEM USER MANUAL
Ethernet Tests
This menu provides the ability to test Trunk and Ethernet cables.
+
A Trunk test (
trA
and
trB
) sends a round-trip test packet to the attached Breakout Box and back over the
specified trunk cable.
+
Cable test (
cable
) is used to verify a RJ-45 style cable using the connectors on the front panel. It sends a test
packet from one of the ports on the front panel and expects to receive it on the other port.