PRG S400 User Manual 3.1 - Manual (Page 53)

PRG SERIES 400 ® POWER AND DATA DISTRIBUTION SYSTEM USER MANUAL 47
Software Info
This menu shows the current software version and boot version for the Series 400 system.
Note: The following is an example screen and may differ from the current released software version.
The Version field shows the system software version number.
The top Date field shows the system software date and time.
The Boot field shows the version number and date for the boot loader module.
The bottom Date field shows the boot loader date and time.
Pressing A will display the software version information for the device connected to Trunk A, while pressing B will
display the software version information for the device connected to Trunk B. (The title line will indicate the type of
device connected.) Press
i/f to return to the SOFTWARE INFO menu for the interface device.
Pressing i/f while in the main SOFTWARE INFO menu will open the STORED BO/NODE INFO menu. This menu
displays the software version information for the Breakout Boxes and Nodes (which store the software in their flash
memory). It will also explicitly load Breakout or Node software from the Rack module.
+ The > BO button sends the stored Breakout version.
+ The >Nod button sends the stored Node version.
+ Pressing i/f while in the STORED BO/NODE INFO menu returns to the SOFTWARE INFO menu.
Press exit to return to the main menu.
Sends stored Breakout software version Sends stored Node software version