PRG S400 User Manual 3.1 - Manual (Page 16)

10 PRG SERIES 400 ® POWER AND DATA DISTRIBUTION SYSTEM USER MANUAL
Figure 1-6: Features By Component (Part 3)
• Seven isolated copper Ethernet ports for input of 10Base-T and
100Base-TX standard signal (Neutrik® EtherCon® connectors).
• Three fiber optic Ethernet ports for transmission of 100Base-FX
standard signal. Two ports allow use of the Virtuoso Fiber Optic
Cable input connector and one port allows use of the Virtuoso®
Fiber Optic Cable output connector.
• Automatic detection and configuration of input signal speed.
• Link, Transmission, and Reception status LEDs for all ports.
• Neutrik® PowerCon® connector for input AC supply (90-240V).
• DC power status LED.
• Standard 1U 19" rack mount chassis.
10-Port Ethernet Switch
• Seven isolated copper Ethernet ports for input of 10Base-T and
100Base-TX standard signal (Neutrik® EtherCon® connectors).
• Automatic detection and configuration of input signal speed.
• Link, Transmission, and Reception status LEDs for all ports.
• Neutrik® PowerCon® connector for input AC supply (90-240V).
• DC power status LED.
• Standard 1U 19" rack mount chassis.
7-Port Ethernet Switch
• Twelve 15A 208V Outputs
• Two VEAM VSC 19-Pin
Connectors
• 15A Long-Time Delay
Trip Curve Circuit
Breakers designed to
handle Strobes
• Compatible with Standard
Socapex Trunk Cables and Fan-
Outs
• Neon Power Indicators for each of Three Phases
• Master Switch Controls Contactors
• Front Panel Flush Rocker Circuit Breakers
• Hot-Swapping Capability
• Used in place of standard
Trunk Cable to power internal
circuit boards in all versions of
S400 Front of House Breakout
Modules
• Enables multiple DMX512
Universes to be
converted to Ethernet
outputs
15A 208V Soca Output Breaker Module
Front of House Trunk DC Adapter