PRG S400 User Manual 3.1 - Manual (Page 4)

II PRG SERIES 400 ® POWER AND DATA DISTRIBUTION SYSTEM USER MANUAL
Revision History
This manual has been revised as follows:
Version Release Date Notes
BASIC April 28, 2006 Initial Release
A May 30, 2006
Updated Rack Configuration drawing p.18.
Added “Software Upgrades” p.39.
B May 13, 2008
Updated “Additional Documentation” section on p. 1.
Incorporated Series 400 400 Amp Disconnect information and warnings.
Incorporated Series 400 10-Port and 7-Port Ethernet Switch descriptions,
features and installation information.
C.1 February 3, 2010
Updated for software version 3.0.
Added menu instructions for: Universal Un-switched DMX Input, DMX
Merge, Source-Assignable Art-Net Input, Network Info, Ethernet Test, and
Load Software from Rack.
Added references to S400Tools Utility application.
C.2 October 14, 2010 Updated book format. (No changes to technical information.)
D July 6, 2012
Added Soca Output Breaker Module and Trunk DC Adapter information.
Added ecode part numbers to Overview.