Potter PFC-6075 User Manual
Page 98
5-92
PFC-6075 • 5403593 • Rev C • 2/13
Fire Communications Bridge (FCB-1000)
The panel supports one (1) FCB-1000. The FCB-1000 provides a remotely-located IP connection into the panel, which may be
designated as the IP reporting device versus passing through the on-board internet connection.
To add and configure the FCB-1000 bridge:
Select
1.
FCB-1000 from the system panel.
Click the
2.
Add Device button. The “Add Device” window displays.
Example of Add FCB-1000 Window
Figure 129.
Double-click in the
3.
“Name” field to customize name.
Double-click in “
4.
Address” field to adjust address, if needed.
Click the
5.
plus sign located in the left-most column to display the "Network Settings" options.
Example of Add FCB-1000 Window
Figure 130.
Set the IP address by choosing one of the following two methods:
6.
The built in DHCP (Dynamic Host Configuration Protocol) option is the default; an IP address is automatically requested
•
from the “Host Computer".
The Network Administrator or Installer may set the IP address using the software's
•
Static IP function.
Click the
7.
minus sign located in the left-most column to suppress the "Network Settings" options from the window.