Potter PFC-6075 - Manual (Page 76)

5-70
PFC-6075 • 5403593 • Rev C • 2/13
Select one or more e-mail address using one of the following options: 3.
Choose " • Use Default” to select the address entered in “General Options” (as shown below).
Choose • "Browse List" to scroll through and select one or more e-mail addresses entered in the “E-mail Reporting”
section of the software.
Choose • “Specify New” to enter additional e-mail addresses, if needed.
Example of the General Options Window - Default Outgoing E-mail Address Figure 92.
E-mail Report Requested from PC
To request a report from a remote PC:
Open or create a new e-mail. 1.
In the 2. "To" field, enter the panel's e-mail address as shown below. (Refer to the "Panel Serial Number Location" shown
earlier in this topic.)
Example of Keywords in E-mail Subject Field Figure 93.
Enter keyword(s) in
Subject field.
System e-mail communications and functions are intended for informational reporting purposes only. They are intended to be used as a
convenience function. e-mail communications should NOT be used as a primary means of reporting emergency information.
Use the "Default" outgoing
e-mail address.