Pcvs-1, -2, Control valve supervisory switch – Potter Releasing Systems User Manual
Page 73

73
PAGE 1 OF 4
PCVS-1, -2
CONTROL VALVE
SUPERVISORY SWITCH
PRINTED IN USA
MFG. #5400980 - REV V
5/09
UL, ULC, and CSFM Listed, FM Approved, NYMEA Accepted,
CE Marked
Dimensions: 4.75"L x 2.25"W x 8.2"H (stem extended)
12,1cm L x 5,7cm W x 18,3cm H
Weight: 1.35 lb. (0,61 kg.)
Enclosure: Cover - Die-cast
Finish - Red Spatter Enamel
Base - Die Cast Zinc
All parts have corrosion resistant finishes.
Cover Tamper: Tamper Resistant Screws,
Optional cover tamper switch kit available
Mounting: 1/2" NPT
Contact Rating: PCVS-1: One set of SPDT (Form C)
PCVS-2: Two sets of SPDT (Form C)
15 Amps at 125/250VAC
2.5 Amps at 30VDC resistive
Environmental Limitations: -40°F to +140°F (-40°C to 60°C)
NEMA 4 and NEMA 6P Enclosure (IP67) when used with
appropriate watertight conduit fittings.
Indoor or Outdoor Use (Not for use in hazardous locations. See
bulletin no. 5400694 PIVS-U-EX for hazardous locations.)
The Model PCVS is a weather proof and tamper resistant switch for
monitoring the open position of fire sprinkler control valves of the post
indicator, butterfly and other types. Depending on the model, one or
two SPDT (Form C) contacts are provided which will operate when the
valve position is altered from an open state.
The unit mounts in a 1/2" NPT tapped hole in the post indicator or
butterfly valve housing. The device is engaged by the indicating
assembly of the post indicator or the operating mechanism of the
butterfly valve, actuating switch(es) when the valve is fully open. The
unit should be installed where it is accessible for service.
The cover is held in place by two tamper resistant screws that require
a special tool to remove. The tool is furnished with each device and
should be left with the building owner or responsible party. Replacement
or additional cover screws and hex keys are available. See ordering
information.
Optional Cover Tamper Switch
A field installable cover tamper switch is available as an option which may
be used to indicate removal of the cover. See ordering information.
Testing
The PCVS and its associated protective monitoring system should be
tested in accordance with applicable NFPA codes and standards and/or
the authority having jurisdiction (manufacturer recommends quarterly
or more frequently).
Potter Electric Signal Company • St. Louis, MO • Phone: 866-956-0988/Canada 888-882-1833
• www.pottersignal.com
Ordering Information
Model
Description
Stock No.
PCVS-1
Potter Control Valve Switch (single switch)
1010107
PCVS-2
Potter Control Valve Switch (double switch)
1010207
--
Cover Screw
5490424
--
Hex Key for Cover Screws and Installation Adjustments
5250062
PBK-S
Pratt Butterfly Valve Kit - Up to 12" (300mm)
0090133
PBK-L
Pratt Butterfly Valve Kit - 14" (355mm) and Up
0090132
PVK
Pratt Valve Kit
1000060
--
Optional Cover Tamper Switch Kit
0090131
KBK
Kennedy Butterfly Valve Kit
0090143
For pressure reducer type valve installation kits (if required) contact valve manufacturer.
Conduit Entrances: Two knockouts for 1/2" conduit provided.
Service Use:
Automatic Sprinkler
NFPA-13
One or two family dwelling
NFPA-13D
Residential occupancy up to four stories
NFPA-13R
National Fire Alarm Code
NFPA-72